Mellanox ConnectX-3 and ConnectX-3 Pro Ethernet adapter Firmware.
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This package provides the Firmware update for Mellanox ConnectX-3 and ConnectX-3 Pro Ethernet Adapters: - Mellanox ConnectX-3 Dual Port 40 GbE QSFP+ Ethernet Adapter - Mellanox ConnectX-3 Dual Port 10 GbE DA/SFP+ Ethernet Adapter - Mellanox ConnectX-3 Dual Port 10 GbE KR Blade Mezzanine Ethernet Card - Mellanox ConnectX-3 Pro Dual Port 40 GbE QSFP+ Ethernet Adapter - Mellanox ConnectX-3 Pro Dual Port 10 GbE DA/SFP+ Ethernet Adapter - Mellanox ConnectX-3 Pro Dual Port 10 GbE KR Blade Mezzanine Ethernet Card
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your system
Search support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier.Show me how
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
FIXES:
- Packet Ethertype: Fixed a mistakenly dropped ETH packet with ethertype 0x600 by the NIC - Broadcast traffic lost: Fixed a case preventing broadcast traffic from arriving to their destination after detaching high priority broadcast rule on a port where NC-SI was enabled. - RSS QP update failure: Fixed a failure to update RSS QP in steering rules. - RDMA read retransmission: Fixed a rare case of completion Error with Bad Opcode sequence status which occurred when retransmitting read requests. - VM QoS: Fixed a case where the actual bandwidth did not match the user settings in VM QoS. - Sideband communication loss: Fixed a case where on rare cases, communication to BMC was lost during driver initialization. - Link down on cable plugging: Fixed an issue with cable reading, which caused the link not to raise - PRM: EQN range: Set the maximum EQN number to 1024. - Vital Product Data read failure: Fixed a rare issue with VPD init flow which caused read failures. - PRM, Statistic counters not reported: Fixed an issue with RX size counter not being reported.
ENHANCEMENTS:
- Add support for Mellanox ConnectX-3 Pro Adapters - Support for IO Identity Optimization feature - Updates to legacy iSCSI boot configuration - Support multiple RoCE modes (RoCE v1+v2) on the same port: RoCE mode is per connection now. - PRM: Added a new QP command 'INIT2RTS_QP' to enhance QP connection readiness time. - Disabled FCS checks to support switches that replace FCS with Timestamp. - Added RX Port identification for direct rout packets. - Improved RDMA WRITE/SEND performance with retransmissions. - Enabled firmware burning/querying using the PRM ACCESS_REG command. - Enabled bad cable EEPROM reporting to the driver. - Added support for priority based A0-DMFS mode (For further information, please refer to the PRM). - Added support for Unicast/Multicast loopback disablement by the driver. (For further information, please refer to the PRM) - Packet Steering: Removed the source IP from the hash calculation (For further information, please refer to the PRM) - Added support for Inline Receive mode up to 2KB.
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update. Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Download 1. Click the "Download Now" link to download the file Network_Firmware_T5Y3H_WN64_02.34.50.60.EXE 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.
Linux Update Package:
Download 1. Click the Download Now link to download the file Network_Firmware_T5Y3H_LN_02.34.50.60.BIN 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Read over the release information presented by executing the ./Network_Firmware_T5Y3H_LN_02.34.50.60.BIN --version command from the shell. 2. Download and install any prerequisites identified inthe above step before proceeding. 3. Run the update by executing ./Network_Firmware_T5Y3H_LN_02.34.50.60.BIN from the shell. 4. Follow the remaining prompts to perform the update
Reboot will be required
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.