Dell Networking N3000 Series, Firmware Version 6.3.2.7
AUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Dell Networking N3000 Ethernet Switch can run as Access Router or Aggregation Router based on the Firmware downloaded and run. The Firmware N3000_BGPv6.3.x.x.stk provides BGP functionality and N3000_N2000v6.3.x.x.stk features Web interface, OpenFlow, iSCSI, GARP, GVRP, GMRP, Auto-VoIP, DVLAN, MVR, and MLAG. Only the listed features are mutually exclusive while other features exist in both the variants of the builds. Please note the feature requirement and select the Firmware to download and run on N3000 Ethernet switch. Please note that since the features present in one variant of the firmware does not exist in other variant, the configuration specific to those exclusive features will fail configuration migration when switching between the firmware variants on N3000 Ethernet switch.
New CPLD version 15 is available in this release for both N3000 and N2000 Series switches. After upgrading the switches to FW version 6.3.2.7, the CPLD can be updated to version 15 from CLI using the command - 'update cpld'. To update CPLD on stack members, run - 'devshell cpldUpdate' command from serial console. Please DO NOT power-cycle the switch when CPLD update is in progress. After CPLD update is complete, it's required to do manual switch power-cycle. Verify CPLD Version with the command - 'show version' from CLI after power-cycle.
**Below information is applicable ONLY for N2000/N3000 switches upgraded to 6.3.2.7 and CPLD Version 15 and attempt to downgrade to any prior FW version**
Downgrading N3000 and N2000 Series switches from firmware version 6.3.2.7 with the updated CPLD version 15 to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2 or B.6.3.32 (N3000_N2000vB.6.3.2.stk or N3000_BGPvB.6.3.32.stk) attached to zip file. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.3.2.7 Firmware" procedure.
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes: CS2502701-N4000-6.3.1.13-N4k Stack shows null/zero MAC in ARP table with PFC config. FIELD-2286-N4032-6.3.1.11-Switch hangs after neighbor-switch reloads manually. FIELD-2193/CS2611600-N4k/6.3.1.8: stack unit crash with task 'tRpcsrv.01000' FIELD-2310-N3048-6.3.2.4-Ubiquiti multicast frame is being looped on MLAG peer link. FIELD-2319-N4064F/6.3.2.4/MLAG primary unit had abrupt reboot task name 'emWeb' PSE036984,FIELD-2299-N1548-6.3.1.8-Fan speed oscillations causing more noise with no-change in temperature. FIELD-2261,FIELD-2323, FIELD-2327-N2048P-6.3.2.3-MAC address not learnt in certain VLAN.
Enhancements: None
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.2.7_Release_Notes".
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
(1) Download the zip file - N3000v6.3.2.7a28.zip (2) Extract the image file "N3000_N2000v6.3.2.7.stk" from the zip file (3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.3.2.7 Firmware.pdf" extracted from zip file.
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.