AUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
After upgrading Dell Networking PC8100 Series switches to firmware version 6.0.0.8 or later (6.3.2.7); the system model ID will show as "N4000" in CLI, Web UI and SNMP interfaces. Dell PowerConnect 8100 Series switches supports N4000 firmware versions 6.0.0.8 and later (6.3.2.7). Both Dell PowerConnect 8100 Series and Dell Networking N4000 Series switches shares the same firmware image version (for example., N4000v6.3.2.7.stk). Dell Networking PC8100 series switches can be stacked with Dell Networking N4000 series switches with the entire stack required to run 6.0.0.8 or later firmware (6.3.2.7). Dell Networking PC8100 series switches can support both 5.x and 6.x firmware versions, but Dell Networking N4000 can support only 6.0.0.8 and later firmware versions.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.2.7_Release_Notes".
Please follow software update instructions included in the zip file - "Upgrading Dell Networking 8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.3.2.7 Firmware.pdf".
Note: PowerConnect 8100 Series switches with B1 CPU Revision require firmware version 5.1.0.1 or later (6.3.2.7) and cannot be downgraded to earlier releases. If this unit is to be deployed as a member within a stack, the entire stack will be required to run 5.1.0.1 or later firmware (6.3.2.7). The improved CPU version XLP308H-B1 version is not compatible with firmware 5.0.x.x. The 'show version' CLI command in the 5.1.0.1 release has been improved to identify the CPU version of the switch.
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes: CS2502701-N4000-6.3.1.13-N4k Stack shows null/zero MAC in ARP table with PFC config. FIELD-2286-N4032-6.3.1.11-Switch hangs after neighbor-switch reloads manually. FIELD-2193/CS2611600-N4k/6.3.1.8: stack unit crash with task 'tRpcsrv.01000' FIELD-2310-N3048-6.3.2.4-Ubiquiti multicast frame is being looped on MLAG peer link. FIELD-2319-N4064F/6.3.2.4/MLAG primary unit had abrupt reboot task name 'emWeb' PSE036984,FIELD-2299-N1548-6.3.1.8-Fan speed oscillations causing more noise with no-change in temperature. FIELD-2261,FIELD-2323, FIELD-2327-N2048P-6.3.2.3-MAC address not learnt in certain VLAN.
Enhancements: None
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.2.7_Release_Notes".
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
(1) Download the zip file - PC8100v6.3.2.7a29.zip (2) Extract the image file "N4000v6.3.2.7.stk" from the zip file (3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking PC8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.3.2.7 Firmware.pdf" extracted from zip file.
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.