자동 스캔을 사용하려면 관리자 권한으로 Windows에 로그인하십시오. 관리자 권한으로 이미 로그인한 상태에서 이 메시지가 표시되었다면 재부팅하시기 바랍니다.시스템이 IT 관리자에 의해 관리되고 있으며, 기능이 제한될 수 있습니다.
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
1. 터치 스크린 비활성화 기능 향상 2. Dell Dock 및 특정 Dell LAN 동글에 대한 OS 설치 이전 MAC 주소 패스스루 지원에 대한 지원이 추가되었습니다. BIOS 설정에서 MAC 주소 패스스루 값을 표시합니다. 3. Type-C-장치 성능 및 안정성 향상
Dell Technologies는 이 중요한 업데이트를 최대한 빨리 적용할 것을 권장합니다. 이 업데이트에는 Dell 시스템의 기능, 신뢰성 및 안정성을 향상시키는 중요한 버그 수정 사항과 변경 사항이 포함되어 있습니다. 또한 보안 수정 사항과 기타 기능 개선 사항을 포함할 수 있습니다.
바탕 화면에 파일 다운로드 XPS_9350_XXX.exe 파일은 범용(Windows/DOS) 형식을 사용하여 Windows 환경에서 바로 실행되도록 설계되었습니다. 1. '지금 다운로드'를 클릭합니다. '파일 다운로드' 창이 나타납니다. 2. ‘저장’ 버튼을 클릭합니다. 다른 이름으로 저장 창이 나타납니다. 3. '저장 위치' 오른쪽에 있는 드롭다운 메뉴를 사용하여 '바탕 화면'을 선택합니다. 4. ‘저장’ 버튼을 클릭합니다. 다운로드가 완료되면 진행률 표시기가 이동합니다. 5. 필요한 경우, 완료 시 다운로드 진행 창의 오른쪽 상단에 있는 X를 클릭하여 창을 닫습니다.
참고: BIOS 업데이트 유틸리티를 실행하기 전에 다른 애플리케이션을 모두 종료하십시오. 기본 유틸리티는 새로운 BIOS를 로드하기 위해 시스템을 재부팅합니다. -------------------------------------------------------------------------------- Windows 환경에서 BIOS 업데이트 유틸리티 실행 1. 바탕 화면에서 9350_BIOS_Rev_XXX.exe라는 아이콘을 두 번 클릭합니다. Dell의 BIOS 플래시 창이 나타납니다. 2. ‘계속' 버튼을 클릭합니다. '확인'을 누르면 모든 애플리케이션이 닫히고 Windows가 종료되고 BIOS가 업데이트된 후, '재부팅됩니다.'라는 메시지가 나타납니다. 3. ‘확인’ 버튼을 클릭합니다. 시스템이 재시작되고 BIOS 업데이트가 완료됩니다.
DOS 환경(Windows 이외 사용자)에서 BIOS 업데이트 유틸리티 실행 참고: 부팅 가능한 DOS 디스켓을 제공해야 합니다. 이 실행 파일은 DOS 시스템 파일을 생성하지 않습니다. 1. XPS_9350_XXX.exe 파일을 부팅 가능한 USB 키에 복사합니다. 2. USB 키에서 DOS 프롬프트로 부팅합니다. 3. Y:\ XPS_9350_XXX.exe를 입력하여 파일을 실행합니다(여기서 Y는 실행 파일이 있는 드라이브 문자). -------------------------------------------------------------------------------- 참고: BitLocker가 활성화된 시스템에서 BIOS를 업데이트하기 전에 BitLocker 암호화를 일시 중단해야 합니다. 시스템에서 BitLocker를 활성화할 수 없는 경우 무시해도 됩니다.
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com. Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Download and Installation 1. Click Download File, to download the file. 2. Click Save to save the file to your hard drive. 3. Browse to the location where you downloaded the file and double-click the new file. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS (Non-Windows users)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com. Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Installation Note: You must provide a bootable USB drive. This executable file does not create the DOS system files. 1. Copy the downloaded file to a bootable USB drive. 2. Power on the system and then Press the F12 key. 3. Select USB Storage Device and boot to the DOS prompt. 4. Run the file by typing following command. For example: C:\ Precision_5530_X.Y.Z.exe Where C is the drive letter of the USB device where the executable file is located and Precision_5530_X.Y.Z.exe is the name of the downloaded file. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.