Flextronics 750W PSU (PN: N30P9, 6W2PW & D5MW8) Firmware Package
Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package provides the firmware for Delta 750W PSU (PN: N30P9, 6W2PW & D5MW8).
To view all drivers for your PowerEdge R720, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...
This is the latest Dell validated version of this driver
This is not the latest Dell validated version of this driver
Power_Firmware_GPWR2_WN64_6B.47.9B_A00.EXE | 18.57 MB
This is a large file. Depending on your connection speed, it may take some time to download.
File Format:
Update Package for MS Windows 64-Bit.
File Name:
Power_Firmware_GPWR2_WN64_6B.47.9B_A00.EXE
File Size:
18.57 MB
Format Description
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
To ensure the integrity of your download, please verify the checksum value.
MD5:
8306459a6cb8216d51b370e24fb87c6e
SHA1:
e95a0cc4fbafb8b193b9bedbe1ebe5663204aabe
SHA-256:
f9f27a1a28223bb29b224806696e71e8e9acb13d62a793ce72076e2970030af9
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.
Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Initial Release for PSU PN: N30P9
Fixes:
- Not Applicable
Enhancement for PSU PN: 6W2PW & D5MW8 :
- Improve current sharing performance for 3+1 PSU Config
Read More
Fixes:
- Not Applicable
Enhancement for PSU PN: 6W2PW & D5MW8 :
- Improve current sharing performance for 3+1 PSU Config
Version
6B.47.9B, A00
Release date
26 Mar 2014
Download Type
Firmware
Category
Power
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats
View Important Information
File Format:
A GnuPG file which contains a cryptographic signature
File Name:
Power_Firmware_GPWR2_LN_6B.47.9B_A00.BIN.sign
File Size:
189 Bytes
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
To ensure the integrity of your download, please verify the checksum value.
MD5:
1a7ac4bbe1a248c6e3afdce625ed06e2
SHA1:
2f8973713d1c786a9fbcefcf342f476aba83dba4
SHA-256:
d6eaa849df74431037e04f60fb8b416721648c608151e69732e77c2cb6d40a77
File Format:
Update Package for MS Windows 32-Bit
File Name:
Power_Firmware_GPWR2_WN32_6B.47.9B_A00.EXE
File Size:
10.74 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
To ensure the integrity of your download, please verify the checksum value.
MD5:
d0f20f4922b49d32f6988b044c7ea340
SHA1:
198613f9e638da18bd6d94a7555869060d76ce9c
SHA-256:
5b1ba91a527689ff814f44a2a5b7509a167afa39736fa4e049830483545cbd13
File Format:
Update Package for Red Hat Linux
File Name:
Power_Firmware_GPWR2_LN_6B.47.9B_A00.BIN
File Size:
6.67 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
To ensure the integrity of your download, please verify the checksum value.
MD5:
fb1bb47febda6768f158f4dea13837de
SHA1:
f8e5ed307764fcb733985924ac45de90715d34fc
SHA-256:
9ada5f9fd94ef7f2cf24f5edf3e07f552d02af0894a53db03900d3f08275fea6
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
IMPORTANT: After successful power supply firmware download, the managed system will turn off for a duration ranging from three to twenty minutes to continue updating the PSU firmware. Once the firmware update is complete, the managed system will reboot automatically.
CAUTION! Performing an AC power cycle or cold boot during power supply firmware update, forces the power supply unit to enter into an irrecoverable state and will cause managed system not to boot.
WARNING: After successful PSU FW Update on PSU PN: 6W2PW & D5MW8, PSU FW Version shall be 69.45.9B
CAUTION! Performing an AC power cycle or cold boot during power supply firmware update, forces the power supply unit to enter into an irrecoverable state and will cause managed system not to boot.
WARNING: After successful PSU FW Update on PSU PN: 6W2PW & D5MW8, PSU FW Version shall be 69.45.9B
Supported Operating Systems
Not Applicable
Looking for a different OS? View the list of Dell supported operating systems
Applies to
ASSY,PWR SPLY,750WP,RDNT,FLX
Flex AC750W Platinum PSU(PSU PN: N30P9)
Flextronics 750W PSU (PN: 6W2PW)
Installation instructions
PSU FIRMWARE UPDATE INSTRUCTIONS:
CAUTION! Performing an AC power cycle or cold boot during power supply firmware update, forces the power supply unit to enter an irrecoverable state and will cause managed system not to boot.
IMPORTANT:
After a successful power supply firmware download, the managed system will turn off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to disturb/restart manually the system, wait until the PSU FW update finishes. (Update time may vary depending on number of PSU for update, it may vary approximately from 10 mins to 20 mins.Margin should be added to ensure the Dell Update Package (DUP) is not interrupted. Once the firmware update is complete, the managed system will reboot automatically.
Instructions for ".BIN" file:
Download
1. Click the Download Now link to download the file.
2. When the "File Download" window appears, click Save to save the file to your hard drive.
Installation
1. Read the release information presented by executing the ".BIN" file with "--version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ".BIN" file from the shell.
4. Follow the remaining prompts to perform the update.
5. Upon successful completion the DUP will prompt to reboot system.
6. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for ".EXE" file:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
6. Upon successful completion the DUP will prompt to reboot system.
7. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for ".sign" file:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to import once on your system.)
2. Verify the Dell Update Package by using its signature file.
3. Upon successful completion the DUP will prompt to reboot system.
4. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
6. Once the flashing process is complete the system should power back up and boot to OS.
CAUTION! Performing an AC power cycle or cold boot during power supply firmware update, forces the power supply unit to enter an irrecoverable state and will cause managed system not to boot.
IMPORTANT:
After a successful power supply firmware download, the managed system will turn off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to disturb/restart manually the system, wait until the PSU FW update finishes. (Update time may vary depending on number of PSU for update, it may vary approximately from 10 mins to 20 mins.Margin should be added to ensure the Dell Update Package (DUP) is not interrupted. Once the firmware update is complete, the managed system will reboot automatically.
Instructions for ".BIN" file:
Download
1. Click the Download Now link to download the file.
2. When the "File Download" window appears, click Save to save the file to your hard drive.
Installation
1. Read the release information presented by executing the ".BIN" file with "--version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ".BIN" file from the shell.
4. Follow the remaining prompts to perform the update.
5. Upon successful completion the DUP will prompt to reboot system.
6. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for ".EXE" file:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
6. Upon successful completion the DUP will prompt to reboot system.
7. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for ".sign" file:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to import once on your system.)
2. Verify the Dell Update Package by using its signature file.
3. Upon successful completion the DUP will prompt to reboot system.
4. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
6. Once the flashing process is complete the system should power back up and boot to OS.
Drivers help and tutorials
For more downloads go to the Drivers and downloads.
For help on using the information on this page, please visit Driver Help and Tutorials.